Billboards, also known as large-format advertisements, are one of the most important marketing elements of companies. Visible from a distance, the large and eye-catching poster will be noticed by many passers-by and drivers. Therefore, correct installation using strong billboard glue is important . Large-format advertising is not a cheap means of communication – therefore, it must be professionally attached.

Billboard assembly with glue – step by step

1. The first step is to get the right billboard adhesive . Pay attention to its consistency – it must be appropriate for the weather conditions at the time of sticking the poster.
2. Then you need to number the individual places on the board, to which we will later glue the appropriate fragments of the poster. The advertising poster itself should be soaked in water.
3. The next step is to carefully check the billboard – make sure that the posters on the board are not peeling off.
4. Now you can apply the billboard glue. The glue is applied using a roller – we spread it over the entire advertising surface.
5. We place the individual elements of the advertising poster on the prepared surface, corresponding to the marked places on the billboard.
6. Each piece of poster placed on the board must be leveled with a brush – no air can get under the poster, otherwise unsightly irregularities or bulges will be visible.
7. Finally, if any parts of the poster protrude beyond the board, they are cut off with a special knife.

It is best to entrust the installation of a billboard to experienced professionals. It is not easy to stick such a large poster perfectly so that there are no bulges or the poster does not peel off quickly. To glue large-format advertisements, you need at least two people, strong, quick-drying billboard glue and other professional products. Assembling a billboard using glue requires patience and a trained eye – to assemble the poster elements into an even whole.